The Brewhouse
The Brewhouse
Embedded Files
- Boil Kettle - 20 gallon G1 Blichmann Pot
- Mash Tun & Hot Liquor Tank - 15 gallon G1 Blichmann Pots
- Two Chugger Pumps (one is starting to act up)
- RipTide Pump - to replace the dying Chugger
- Blichmann BoilCoil in the BK & HLT
- RIMS-Rocket for the MT
- Tower of Power
- Blichmann Power Modules
The Brew Cart
The Brew Cart
- The current Brew Cart
- Was Dual Burners but now all Electric
- The original Brew Cart
- Crane to lift the BIAB bag out
- Dual Burners
Fermentation
Fermentation
- Blichmann Fermenator 14.5 Gallon Conical.
- My own hacked lid with cooling coil and thermowells for temperature probes
- My created insulation jacket. 1/2" neoprene. Works very well
- Under the Insulation are two heating mats
- Insulation is wrapped around the cooling hoses
- Fermentation heat is controlled by a Controller
- Fermentation cooling controlled via controller through a cooling coil and a pump us an old cheap pin lock keg as a glycol reservoir
- Chest Freezer to hold the finished beer for aging and to keep the glycol cold during fermentation
The Aging Tank, Filter, Kegging
The Aging Tank, Filter, Kegging
- 10 gallon Corny Keg that's used as an aging/lagering tank
- I added a thermowell in the lid so I can monitor internal beer temperature for the controller to regulate the chest freezer
- Had to get a Williams Brewing Oversized Keg O-Ring, the normal one didn't seal very well
- Filtering from 10 gal corny to the 5 gal serving kegs (before I got everything setup as in the chest freezer).
- 10 gal corny stays in the chest freezer and I transfer that way to the 5 gal kegs
- Canister filter kit from MoreBeer and I use 1 micron BevBrite filters
The Beer Fridge
The Beer Fridge
- 5 Tap Beer Fridge
- White board or Chalk on reverse side
- 5 Kegs inside
- The tap shanks and hoses. Welded some scrap sheet metal to evenly apply the nut pressure evenly
- 6-way CO2 Manifold for CO2 distribution
- CO2 cylinder with the cage I welded up.
- Quick disconnects for CO2 & Beer for the BeerGun for Bottling
Miscellaneous Equipment
Miscellaneous Equipment
- The Keg Dolly that I made to haul my full kegs around
- More to Come
Page updated
Report abuse